Get the Victorinox 12" Granton Edge Slicing Knife if you want the safe pick. On a tighter budget, look at the Butcher BBQ 12 Inch Granton Brisket Slicing Knife. Full ranking and prices below.
- Best overallVictorinox 12" Granton Edge Slicing Knife$87 at All Things Barbecue
- Runner-upButcher BBQ 12 Inch Granton Brisket Slicing Knife$23.99 at Butcher BBQ
- Also greatCangshan HELENA 11-Inch Slicing Knife$89.95 at All Things Barbecue
We may earn a commission when you buy through the store links on this page. It never changes what we pick.
On this page
- Best Knife for Slicing Brisket: Quick List
- 1. Victorinox 12" Granton Edge Slicing Knife
- 2. Butcher BBQ 12 Inch Granton Brisket Slicing Knife
- 3. Cangshan HELENA 11-Inch Slicing Knife
- 4. Dalstrong Gladiator 12" Slicer and 6" Boning Knife Set
- 5. Shun Premier 9.5" Slicing Knife
- 6. Butcher BBQ 6 Inch Boning Knife
- 7. Victorinox 7" Honing Steel
- Price Per Inch of Blade
- Granton Edge vs Plain Edge vs Serrated
- Slicing Knives vs Carving Knives
- Blade Material and Hardness
- How Long Should a Brisket Knife Be
- How to Slice Brisket: Flat and Point
- Knife Care: Keep Your Brisket Knife Sharp
- Building a Brisket Knife Kit on Any Budget
- What's New in Brisket Knives for 2026
- How We Picked the Best Knife for Slicing Brisket
- FAQ
- Verdict: Best Knife for Slicing Brisket
The best knife for slicing brisket is the Victorinox 12 inch Granton Edge Slicing Knife. It is long enough to cross a whole flat in one stroke, it has a smooth edge that won't tear the bark, and America's Test Kitchen has named it its favorite for years. It cost $87 at All Things Barbecue on Nov 20, 2026. On a budget, the Butcher BBQ 12 inch slicer does the same job for $23.99. Below we rank seven knives, including the boning knife you need before the cook, and work out what each one costs per inch of blade.
Best Knife for Slicing Brisket: Quick List
- Victorinox 12" Granton Edge: best knife for slicing brisket overall.
- Butcher BBQ 12 Inch Granton: best budget brisket slicer.
- Cangshan HELENA 11-Inch: best forged slicer under $100.
- Dalstrong Gladiator 2-piece set: best slicer and trimmer pair.
- Shun Premier 9.5": best premium Japanese slicer.
- Butcher BBQ 6 Inch Boning Knife: best knife for trimming brisket.
- Victorinox 7" Honing Steel: best way to keep the edge sharp.
Find every knife, with the date we checked the price, on our knives and cutting shop page.
1. Victorinox 12" Granton Edge Slicing Knife
Best knife for slicing brisket overall. $87 at All Things Barbecue.
This is the knife most reviewers pick first. America's Test Kitchen calls the Victorinox Fibrox 12 inch Granton slicer its longtime favorite, with a long, very sharp blade that slices with no effort. The Sharp Kitchen says both America's Test Kitchen and Serious Eats name it as their pick. Knives Advice and All Things Backyard rank it best overall too.
Here is what the listing says:
- Blade: 12 inches, high-carbon stainless steel.
- Edge: smooth, with Granton hollows along the side.
- Tip: rounded, for long, straight cuts.
- Handle: Fibrox, textured and slip-resistant.
- Rating: NSF approved, with a lifetime warranty.
- Made in: Switzerland.
- Price per inch: $7.25.
The Sharp Kitchen lists the true blade length as 11.8 inches, sold as 12 inches, at 6.2 oz. It is light and stamped, not forged. That keeps the price down and makes it easy to control over a long slicing session.
The Granton hollows are the scallops on the side of the blade. They let a little air in between the steel and the meat, so slices fall away instead of sticking. On a juicy brisket point, that helps.
The downside is looks. The plastic handle won't impress guests. If you want a knife that feels special in your hand, see the Cangshan or the Shun below.
Who should buy it: almost everyone. It is the safe, proven pick.
2. Butcher BBQ 12 Inch Granton Brisket Slicing Knife
Best budget brisket slicer. $23.99 at Butcher BBQ.
At $23.99, this is the cheapest 12 inch Granton slicer on our list. It costs $2.00 per inch of blade, less than a third of the Victorinox.
The specs from Butcher BBQ:
- Blade: 12 inches, high-carbon stainless steel.
- Edge: smooth, with Granton hollows, not serrated.
- Profile: long and narrow, for one long pull.
- Care: hone as needed, and sharpen when honing no longer brings the edge back.
- Price per inch: $2.00.
Butcher BBQ built this knife for one job: carving finished brisket and other big cooked cuts. It says a smooth-edged slicer helps keep the bark intact when used with gentle strokes. That matches what Brad teaches.
You give up some polish and maybe some edge holding. A cheap stamped blade often dulls faster. Keep a honing steel next to it, and it will slice well for years of backyard cooks.
Grate and Grill makes a fair point about cheap knives. It says a softer blade takes an edge in seconds on a honing steel and loses it just as fast. That is fine for brisket, since you slice a few times a month, not all day.
Who should buy it: a new brisket cook, or anyone who wants a slicer without spending much.
3. Cangshan HELENA 11-Inch Slicing Knife
Best forged slicer under $100. $89.95 at All Things Barbecue.
The Cangshan HELENA is a forged knife for about the same money as the Victorinox. It feels heavier and looks better on a cutting board in front of guests.
The specs from Cangshan via All Things Barbecue:
- Blade: 11 inches, German X50CrMoV15 stainless steel.
- Build: full tang, with a semi-bolster.
- Hardness: HRC 58 +/- 2 on the Rockwell scale.
- Rating: NSF certified.
- Price per inch: $8.18.
The full tang means the steel runs all the way through the handle. That gives better balance. HRC 58 is harder than most stamped slicers, so the edge lasts longer between sharpenings.
The trade-off is length. At 11 inches, it is an inch shorter than our top two picks. Grate and Grill calls 11 inches the practical minimum for a dedicated slicer and 12 inches the comfortable answer. America's Test Kitchen found 12 inch blades spanned a brisket better than 10 or 11 inch ones. On a big packer flat, you may need two strokes.
Who should buy it: a cook who wants a forged knife that looks good, and who cooks briskets under about 14 lb.
4. Dalstrong Gladiator 12" Slicer and 6" Boning Knife Set
Best slicer and trimmer pair. $129 at Dalstrong.
A brisket needs two knives. One trims the raw meat before the cook. The other slices it after. The Dalstrong Gladiator Series Elite set gives you both in one box.
The specs from Dalstrong:
- Slicer: 12 inches.
- Boning knife: 6 inches, for trimming.
- Rating: NSF certified.
- Price: $129 for both.
Char Chimney says the Dalstrong Gladiator 12 inch slicer uses German X50CrMoV15 steel at 54 to 56 HRC, with a G10 handle, a fitted sheath, and gift packaging. All Things Backyard calls the Gladiator Elite 12 inch slicer its best upgrade, forged German steel at 56+ HRC.
To judge the set, compare it with buying apart. The Victorinox slicer at $87 plus the Butcher BBQ boning knife at $18.99 costs $105.99. The Dalstrong set costs $23 more, and you get matching forged knives and sheaths. Knives Advice suggests the Dalstrong Gladiator Elite as a gift for a pitmaster, and the packaging suits a gift.
Who should buy it: a cook who wants a matched pair, or anyone shopping for a gift.
5. Shun Premier 9.5" Slicing Knife
Best premium Japanese slicer. $219.95 at All Things Barbecue.
The Shun Premier is the luxury pick. It is the sharpest knife on our list, and it looks the part.
The specs from Shun via All Things Barbecue:
- Blade: 9.5 inches, VG-MAX steel core.
- Cladding: 34 layers of stainless Damascus on each side.
- Edge: hand-sharpened 16° double bevel.
- Made in: Japan, by hand.
- Price per inch: $23.15.
A 16° edge is far keener than a typical Western knife. Serious Eats says Western knives are sharpened to around 20 degrees. Knives Advice says Shun will sharpen its knives for you for free.
The big catch is length. At 9.5 inches, it is too short to cross a whole flat in one stroke. America's Test Kitchen says blades of 9 to 10 inches offer no real edge over a chef's knife for big cuts. It is a great knife for the point, a smaller flat, or a prime rib. If you want a Shun for whole packers, Knives Advice ranks the Shun Classic 12 inch brisket knife as its premium pick.
Who should buy it: a cook who loves fine knives and slices smaller cuts.
6. Butcher BBQ 6 Inch Boning Knife
Best knife for trimming brisket. $18.99 at Butcher BBQ.
Every brisket starts with the trim. You cut the fat cap down, peel off the silver skin, and square up the edges. A 12 inch slicer is the wrong tool for that. Smoke and Slow says trimming means following a curved fat cap with the blade almost flat, a quarter inch at a time.
The specs from Butcher BBQ:
- Blade: 6 inches, with a curved, semi-stiff profile.
- Steel: high-carbon stainless.
- Handle: textured nylon, for a grip with wet hands.
- Price: $18.99.
The curve rides along the fat cap. The semi-stiff blade pushes through silver skin without bending. Brad uses a 6 inch flexible boning knife and trims his brisket cold, so the fat is firm and easy to cut.
If you want a forged option, the Cangshan Helena 6 inch boning knife costs $49.95, in the same German steel as the Helena slicer. Smoke and Slow likes the Victorinox Fibrox Pro 6 inch curved boning knife for the same job.
Who should buy it: every brisket cook. Buy this before you buy a fancy slicer.
7. Victorinox 7" Honing Steel
Best way to keep the edge sharp. $18.99 at All Things Barbecue.
A honing steel does not sharpen a knife. It straightens the thin edge, which bends a little every time you cut. A few strokes before you slice keeps any knife on this list cutting clean.
The specs from Victorinox via All Things Barbecue:
- Length: 7 inches.
- Surface: chrome-plated, medium-fine cut.
- Works on: knives up to 65 HRC.
- Price: $18.99.
That 65 HRC limit covers every knife here. Use it before each brisket. Hold the steel point down on the board, and pull the blade down it at a slight angle. Use five strokes on each side.
When honing no longer brings the edge back, it is time to sharpen. Butcher BBQ gives the same advice for its knives.
Who should buy it: anyone who owns a slicer. It is the cheapest way to make a dull knife cut like new.
Price Per Inch of Blade
Most reviews compare knives by price. Here is what each slicer costs per inch of blade, using the prices we checked:
- Butcher BBQ 12 inch Granton: $23.99, or $2.00 per inch.
- Victorinox 12 inch Granton: $87, or $7.25 per inch.
- Cangshan HELENA 11 inch: $89.95, or $8.18 per inch.
- Shun Premier 9.5 inch: $219.95, or $23.15 per inch.
The spread is more than 11 times from the cheapest to the costliest. The Shun costs $23.15 per inch, and it is also the shortest blade.
The extra money buys harder steel, a keener edge, and better looks. It does not buy length, and length matters most on a brisket. A 12 inch slicer gives you 2 inches more blade than a 10 inch one. That is the difference between one clean stroke and two ragged ones across a wide flat.
So the best knife for slicing brisket is not the costliest one. It is the longest, sharpest blade you will keep honed. A $23.99 slicer with a fresh edge beats a $219.95 knife that has gone dull in a drawer. Spend on length first, then on steel and looks if your budget allows.
Granton Edge vs Plain Edge vs Serrated
There are three common edges on a slicing knife:
- Granton edge. A smooth edge with scallops along the side of the blade. The scallops let air in, so slices fall off the knife. The Victorinox, Butcher BBQ, and Dalstrong slicers use it.
- Plain edge. A smooth edge with a flat blade face. Smoke and Slow tells first-time cooks to buy one 12 inch plain-edge slicer. It slices just as well as a Granton. Slices may stick a bit more.
- Serrated. A saw-tooth edge like a bread knife. It grips crust well, but it tears the soft meat under the bark. Brad uses a long, non-serrated slicing knife for this reason.
Granton or plain both work. Skip the serrated knife for brisket. Smoke and Slow says sawing is what turns a long-built bark into a pile of ragged, shredded slices.
Electric knives fall short too. The Sharp Kitchen says America's Test Kitchen found most electric knives have less than seven inches of usable blade. That is too short for a full brisket.
Slicing Knives vs Carving Knives
Stores often sell slicing knives and carving knives side by side. They are not the same tool.
- Slicing knives are long and narrow, with a rounded tip. America's Test Kitchen says they measure 10 to 12 inches and are often a bit taller from edge to spine. They are made for long, straight cuts through big boneless meat like brisket.
- Carving knives are shorter and pointed. America's Test Kitchen says they measure about 8 to 10 inches. Serious Eats says the shorter length makes it easier to work around bones, like on a turkey or a ham.
For brisket, buy a slicer. The rounded tip and long blade let you pull one smooth stroke across the flat. A carving knife works for the point, but it is too short for a whole packer.
Blade height matters too. America's Test Kitchen liked blades about 1.5 inches tall. A taller blade gives your knuckles room above the board and keeps the cut straight. Some knives have a wavy edge, which works like a mild serration. It grips the bark but can still tear soft meat, so a smooth edge is the safer pick.
Blade Material and Hardness
Most brisket slicers use some form of stainless steel. The details decide how long the edge holds up:
- High-carbon stainless steel. The Victorinox and Butcher BBQ slicers use it. It resists rust and sharpens easily.
- German X50CrMoV15. The Cangshan HELENA and Dalstrong Gladiator use this forged steel. Cangshan rates its Helena knives at HRC 58 +/- 2.
- Japanese VG-MAX. The Shun Premier uses a VG-MAX core under Damascus layers. It takes a very keen edge.
HRC is the Rockwell hardness number. A higher number means a harder blade that holds its edge longer but can chip if you twist it. A lower number means a softer blade that is easy to hone back. Grate and Grill says a 53 to 54 HRC blade takes an edge in seconds on a honing steel and gives it up just as fast.
For a brisket knife you use a few times a month, any of these steels is fine. Pick the length and edge first, and the steel second. America's Test Kitchen also liked blades with a small 15 degree edge angle, sharpened and honed well at the factory.
How Long Should a Brisket Knife Be
Buy a slicer of 11 to 12 inches. For most cooks, 12 is the best length.
Here is why:
- A packer is long. Smoke and Slow says a packer brisket is between 10 and 18 inches long and can be a foot across at the flat.
- The flat is wide. Grate and Grill says a flat is commonly 8 to 10 inches across at its widest. An 8 inch chef's knife can't cross it in one stroke.
- Longer blades span more. America's Test Kitchen found 12 inch blades better at spanning brisket and making long, smooth cuts than blades of 10 or 11 inches.
- The top reviews agree. Serious Eats says a brisket calls for an 11 to 12 inch blade, so you use the whole edge.
America's Test Kitchen also liked blades about 1.5 inches tall from edge to spine. A taller blade stays straight in the cut.
If you cook big Prime packers, a 14 inch slicer is worth a look. Knives Advice says whole packers for a crowd call for a 14 inch blade, and Food and Wine found a 14 inch Wüsthof crossed a whole brisket in one cut.
How to Slice Brisket: Flat and Point
A good knife only works if you slice the right way. Brad's book puts it simply: slice against the grain, about pencil thick, and serve the sauce on the side.
- Rest it first. Let the brisket rest at least 2 hours, wrapped. Brad often rests his for 4 hours or more. Slicing too soon lets the juice run out on the board.
- Find the grain. Look at the lines in the meat. You will slice across them, not along them.
- Separate the point from the flat. A brisket has two muscles. The grain runs one way through the flat and a different way through the point. Cut along the fat seam between them.
- Slice the flat. Turn the flat so the grain runs left to right. Slice straight down, across the grain, about pencil thick.
- Turn the point. Rotate the point about 90 degrees, as Food and Wine says, so you slice across its grain too. Cut it a little thicker, since it is fattier, or cube it for burnt ends.
- Use long, single strokes. Pull the knife from heel to tip in one motion. Don't saw.
- Slice only what you serve. Sliced brisket dries out fast. Keep the rest whole and wrapped until you need it.
A large cutting board helps. The Boos Block maple board from All Things Barbecue measures 20 x 15 x 1.5 inches and costs $124.95. For easy cleanup, Butcher BBQ sells a disposable cutting board roll for $17.99, about $0.69 per sheet.
Knife Care: Keep Your Brisket Knife Sharp
A good knife lasts decades if you treat it well. Follow these simple rules:
- Hand wash only. A dishwasher dulls the edge and can crack handles. Wash with warm, soapy water and dry it right away.
- Hone before every cook. A few strokes on a steel keep the edge straight.
- Sharpen once or twice a year. Use a whetstone, a pull-through sharpener made for your edge angle, or a sharpening service.
- Store it safely. Use a sheath, a knife guard, or a magnetic strip. Loose knives in a drawer chip and dull.
- Cut on wood or plastic. Glass, stone, and metal ruin edges fast.
Brad's book gives the same advice for every knife in the kit. A sharp knife is safer too, since it cuts where you point it instead of slipping.
Building a Brisket Knife Kit on Any Budget
You need two knives and a steel. Here are three kits from our picks, priced at the same check:
- Starter, $42.98: the Butcher BBQ 12 inch slicer plus the Butcher BBQ 6 inch boning knife. That is all you need for a great first brisket.
- Standard, $105.99: the Victorinox 12 inch slicer plus the Victorinox honing steel. Add the Butcher BBQ boning knife for $18.99 more.
- Gift kit, $129: the Dalstrong Gladiator set, with a matched slicer and boning knife.
Brad's view on gear fits here too. You don't need a lot of costly gear to make great brisket. A sharp slicer and a sharp trimmer cover the whole cook.
What's New in Brisket Knives for 2026
Prices for the classic picks stayed low. On Nov 20, 2026, All Things Barbecue sold the Victorinox 12 inch Granton slicer for $87. Butcher BBQ listed its own 12 inch Granton slicer at $23.99 and its 6 inch boning knife at $18.99. Dalstrong sold its Gladiator Series Elite set, with a 12 inch slicer and a 6 inch boning knife, for $129.
More reviews now pair the slicer with a trimming knife. Smoke and Slow calls the 6 inch boning knife the other half of the job, and the half almost nobody buys for. Char Chimney lists the Cutluxe two-piece BBQ set for the same reason.
Long blades are getting more love too. Food and Wine found a 14 inch Wüsthof cut through a whole brisket in one stroke. The 12 inch slicer is still the standard, but cooks who smoke big Prime packers now have more choices.
How We Picked the Best Knife for Slicing Brisket
We read the 10 reviews that rank for this search, including America's Test Kitchen, Serious Eats, Food and Wine, Smoke and Slow, Grate and Grill, Knives Advice, and Char Chimney. We noted which knives they ranked first and what each one said about blade length, edge type, and steel.
Then we pulled specs and prices from each store's own page on the same day. We divided each price by the blade length to get a cost per inch. That number shows what you are really paying for.
We did not slice briskets with these knives ourselves. Our picks follow reviewer agreement, maker specs, and the method in Brad's Real Easy Texas Brisket Manual. Brad uses a long, non-serrated slicing knife and a 6 inch flexible boning knife. We may earn a commission if you buy through our links.
FAQ
What knife does Aaron Franklin use to slice brisket?
The Sharp Kitchen says Aaron Franklin prefers an inexpensive scalloped slicer. That fits what most top reviews say: a long, smooth-edged slicer of about 12 inches does the job, and you do not need a costly knife. The Victorinox 12 inch Granton and the Butcher BBQ 12 inch slicer are both in that style.
Is a serrated knife good for brisket?
No. A serrated knife saws through the meat, and sawing tears the soft brisket under the bark. Brad uses a long, non-serrated slicer for clean cuts. Pick a smooth edge, either plain or Granton, at 11 to 12 inches long. Pull it through each slice in one long, gentle stroke from heel to tip.
What size knife do you need for brisket?
Get a slicer of 11 to 12 inches for cooked brisket. America's Test Kitchen found 12 inch blades crossed a brisket better than shorter ones. You also need a 6 inch boning knife for trimming the raw brisket before the cook. Those two knives, plus a honing steel, cover the whole job from trim to slice.
What is a Granton edge?
A Granton edge is a smooth blade with a row of shallow scallops along its side. The scallops leave small air pockets between the steel and the meat, so slices fall away instead of sticking to the blade. The edge itself is not serrated. Victorinox, Butcher BBQ, and Dalstrong all make Granton slicers for brisket.
Verdict: Best Knife for Slicing Brisket
The best knife for slicing brisket is the Victorinox 12 inch Granton Edge at $87. It is long and sharp, and the top test kitchens back it. On a budget, the Butcher BBQ 12 inch slicer does the same job for $23.99. Pair either one with a 6 inch boning knife for the trim and a honing steel for upkeep. Then rest the brisket well, separate the point from the flat, and slice each one across its own grain.
